TMR Zoo Message Board

Nothing wrong with those circles they are going to be filled with speakers anyway. Are you putting some metal corners on there and feet or wheels ? I put some wheels on a combo made it so much better.

I've got some rubber feet for it. Haven't made up my mind on the corners yet. I have some beat up looking shiny corners, and a full set of black corners. I'm not really sure if either will fit this route.

Corners are required pretty much. Heck everything vaguely rectangular in this room has them apparently.

(04-21-2016, 03:13 PM)karpathion Wrote: [ -> ]I've got some rubber feet for it. 

It might not look pretty, it will be stable!  Goshdarnit!

I don't even remember where these things came from, but the shape of them is right. I can use them.

A Dremel with a wire brush bit should clean those up nicely. Score one for the recycled freebie!

No picking on the blanket. I love that thing!

[img]<a href=[/img]" />

I would leave the corners reliced. If you must clean them up soak them in CLR dry them off and seal them with a thin coat of clear.

LMMFAO! I got so excited to be able to mount the baffle, I put in on upside down. Luckily all the screw holes are the same. You could put it on the back or front and upside down, and it will still line up.

It's almost done! I can see the light at the end of the tunnel.

[img]<a href=[/img]" />

It's far from perfect and I won't have the corners until Monday or Tuesday, but she is done! Speakers are in, wired to 8ohms. Everything is buttoned up and ready to play. Won't get to do that until morning, but who cares! I've almost 2 weeks worth of work in it.

The corners will set it off even more.

[img]<a href=[/img]" />

[img]<a href=[/img]" />

[img]<a href=[/img]" />

[img]<a href=[/img]" />

[img]<a href=[/img]" />

Looks pretty great all around , nice job !

Your speaker cloth is off angle.