TMR Zoo Message Board
Let's Design A 2x12 Cabinet. - Printable Version

+- TMR Zoo Message Board (http://www.tmrzoo.com/boards)
+-- Forum: The Zoo Zones (http://www.tmrzoo.com/boards/forumdisplay.php?fid=31)
+--- Forum: Guitar Gear - Amps, Axes and Effects (http://www.tmrzoo.com/boards/forumdisplay.php?fid=47)
+--- Thread: Let's Design A 2x12 Cabinet. (/showthread.php?tid=9641)

Pages: 1 2 3 4 5 6 7 8 9 10 11

RE: Let's Design A 2x12 Cabinet. - Snake Aces - 04-16-2016

I didn't know Karp ate wood but if it gets us cabs...

RE: Let's Design A 2x12 Cabinet. - lreese - 04-16-2016

I'm feeling a little inspiration.

I got this table saw I bought and have not used... No extra funds to feed it.

RE: Let's Design A 2x12 Cabinet. - karpathion - 04-16-2016

(04-16-2016, 08:12 AM)Securb Wrote: It would be great if we could feed Karp beer and wood and he could pump out an endless stream of cabs for us.

1-2 beers while working is fine. Feed me a 12 pack and there would a chainsaw and blowtorch involved very shortly.

RE: Let's Design A 2x12 Cabinet. - karpathion - 04-17-2016

Hey Oinkus, you obviously know what's up with this stuff. Give me your opinion on something.

I want to use this same pine for my rear panel and baffle, but all I can get is 12" planks. Do you think gluing 2 pieces togother to get  24", would hold up for baffle use? I know the titebond seam will not break, but I'm worried about that small section in-between the speakers.

I'm thinking that if it gives somewhere that's where it will crack. Probably just above or below the glue seam. What do you think?

I'm about 99.9% sure it'll be fine. I'd just like a second opinion.

RE: Let's Design A 2x12 Cabinet. - Oinkus - 04-17-2016

Should be fine , could reinforce it if you feel really uneasy. Don't you want the baffle to be a little thinner then that so it will flex a little ? Are you setting the speakers diagonally apart for more space between them ?

RE: Let's Design A 2x12 Cabinet. - karpathion - 04-17-2016

Yeah, I ended up getting the wife to pick up a couple pieces of wood. She was supposed to get a 1/2"x 2'x 4' piece of birch ply for the baffle, and a 3/4" in piece for the rear panel. 

She brought me 2, 1/2" pieces...

I'm about to say to hell with it and just use it for the rear panel too. If it acts funny, I can just replace it later. It should be fine.

Both speakers will be closer to the bottom.

RE: Let's Design A 2x12 Cabinet. - Oinkus - 04-17-2016

I used to have one of these and always thought it was a great design. [Image: sunn-beta-lead-combo-667929.jpg]

RE: Let's Design A 2x12 Cabinet. - karpathion - 04-17-2016

I'm too lazy to put that much more effort in to it. Lol!

RE: Let's Design A 2x12 Cabinet. - Oinkus - 04-18-2016

First SS amp I ever saw and it had 2 channels in the mid 70s was deafeningly loud.

RE: Let's Design A 2x12 Cabinet. - karpathion - 04-18-2016

With the help of the paint guy in Lowes, I think I have my stain. This is just a test piece rubbed with a paper towel. The cabinet will look much better with it after it gets sanded and the stain is rubbed on right. The poly or whatever I use to finish it will make the grain pop like hell. I'm liking what I'm seeing so far.

[img]<a href=[/img][Image: 12oxkq.jpg]" />

This is closer to what you will see on the finished product.

[img]<a href=[/img][Image: 12oy6d.jpg]" />