TMR Zoo Message Board
Tips on spraypainting? - Printable Version

+- TMR Zoo Message Board (http://www.tmrzoo.com/boards)
+-- Forum: The Zoo Zones (http://www.tmrzoo.com/boards/forumdisplay.php?fid=31)
+--- Forum: Guitar Gear - Amps, Axes and Effects (http://www.tmrzoo.com/boards/forumdisplay.php?fid=47)
+--- Thread: Tips on spraypainting? (/showthread.php?tid=8045)

Tips on spraypainting? - Agileguy - 04-13-2015

So DIY powder coating is out. I don't have a need for a whole powder coating rig, and I don't want to spend all of the effort required to get a good end product. I just want to make my Crybaby sexy in purple metallic.


However, I think it's time to step up my spray painting game. I've always been just okay at it. I did all right when I spray painted my pedaltrain a few weeks ago, but I want something really really good looking. So I'm going to do this right. I'm going to make a spray booth in my garage. I'm going to make sure that my limited paitence for this job doesn't get the best of me, and I'm going to do truly light coats. I'm going to sand between coats.  I'm even going to get a cheap toaster oven and bake the paint to make it more durable. I've just got a few questions. Here's what I'm using as a guide.
  • Should I sand between every coat? If so, when should I bake the finish?
  • Are there any paint brands that you can recommend as being particularly high quality without being prohibitively expensive, or is Krylon good enough? I've heard good things about Duplicolor.
  • What would you recommend for a clear coat? I've heard using automotive grade lacquer makes for a durable clear coat, but I've also heard that your base and clear should be the same base material - ie, acrylic and acrylic, etc.
If you have any other general tips, I'd be happy to hear those too. I really want to do a good job on this pedal. I want it to be as close to as durable as a powder coat as possible. If I have to spend near what I would getting it professionally powder coated, so be it. This is a useful skill to have anyway, especially if I want to ever refinish a guitar.

RE: Tips on spraypainting? - CTN - 04-13-2015

I'm guessing this is what you wanted to talk to me about last night.

I'll be able to answer most of those questions, but only on Tuesday. Today I'm not gonna have any time at all :(

RE: Tips on spraypainting? - Securb - 04-13-2015

Spray past your work don't stop the paint flow on your work.

RE: Tips on spraypainting? - Agileguy - 04-13-2015

(04-13-2015, 05:24 AM)CTN Wrote: I'm guessing this is what you wanted to talk to me about last night.

I'll be able to answer most of those questions, but only on Tuesday. Today I'm not gonna have any time at all :(

Partly, yeah.

Don't worry, I'm just trying to gather as much information as possible before I start the project either this weekend or sometime next week. Your input would be greatly appreciated though, whenever you have the time to dispense it.

RE: Tips on spraypainting? - kinnikuman - 04-13-2015

During the final stage ''wet in'' using a really thinned out clear. Make sure you preparation with a good undercoat and guide coat if you're worried about imperfections.