Vintage amp restoration and Beyond

[GoldenVulture]

Finished wiring up almost. I will go over it and double check everything when done.
Then I'll power it up minus valves and measure all my voltages.








I've wired in two output jacks , one to the 8 Ohm tap and one to the 16 Ohm tap.
Only got one input jack wired up currently.
Presuming it tests good and then when loaded with valves, there will be more to do as in cutting up the pot shafts to length and clean the fuse mounts. Then maybe wire up an FX loop or some thing in the empty valve socket