Had the day off today so I finished working on the PCB design I was talking about on the "other" forum.
![[Image: RedHerringPCB_zpsc3c8aa09.png]](http://img.photobucket.com/albums/v621/blackwater/RedHerringPCB_zpsc3c8aa09.png)
The dark red traces are the top layer traces, and the blue are bottom layer.
I decided not to board-mount the switches cuz it's a bitch and a half to find on/on/on dpdt switches with pcb mounting lugs (ie pretty much impossible, it seems).
I did find little screw terminals though, which will be used for the pickup connections, and a smaller terminal for quick swapping tone control capacitors.
The whole board is about 55 x 22mm or 2.16 x 0.86 inches.
The dark red traces are the top layer traces, and the blue are bottom layer.
I decided not to board-mount the switches cuz it's a bitch and a half to find on/on/on dpdt switches with pcb mounting lugs (ie pretty much impossible, it seems).
I did find little screw terminals though, which will be used for the pickup connections, and a smaller terminal for quick swapping tone control capacitors.
The whole board is about 55 x 22mm or 2.16 x 0.86 inches.