01-07-2015, 10:30 PM
(This post was last modified: 01-08-2015, 01:12 AM by kinnikuman.)
Fail. FAil FAIL. Switch still lets through signal on both pups in the bridge position.
Pre amp is noisy as a demon at full volume..
It took me less time to wire it in this time and the job is pretty damn neat.
I am not going to let this fucking thing defeat me. I will get my bro to come test it all again and see what he thinks.
Would it be possible that the dimarzio shockwave was only designed to work with low output pickups? It did originally come with 7k pups. Because at full volume its too noisy and at half its fine.
I did find this info
The Shock Wave Power Module is a high-gain, active preamp with low impedance output, built into a unitized locking output jack and backplate. the Shock Wave System includes the Power Module and three vertical humbuckers that were specially designed to work with it in both active and passive modes.
![[Image: 2015-01-08115000.jpg]](http://i930.photobucket.com/albums/ad150/kramersteen/2015-01-08115000.jpg)
\
I just noticed i didnt ground the tone pot. ^^ hmm brb in a few hours after play time.
Well that made no difference. It grounded the pot but i am still having problems. The switch seems ok now. Both signal comes through on one side but its only a small amount. Maybe thats normal?
The preamp is a bitch it screams when the tone is on full. when its off it seems ok. I might just go to normal jack again. haha this is practice ctn you cunty bullox.
Pre amp is noisy as a demon at full volume..
It took me less time to wire it in this time and the job is pretty damn neat.
I am not going to let this fucking thing defeat me. I will get my bro to come test it all again and see what he thinks.
Would it be possible that the dimarzio shockwave was only designed to work with low output pickups? It did originally come with 7k pups. Because at full volume its too noisy and at half its fine.
I did find this info
The Shock Wave Power Module is a high-gain, active preamp with low impedance output, built into a unitized locking output jack and backplate. the Shock Wave System includes the Power Module and three vertical humbuckers that were specially designed to work with it in both active and passive modes.
![[Image: 2015-01-08115000.jpg]](http://s930.photobucket.com/user/kramersteen/media/2015-01-08115000.jpg.html)
\I just noticed i didnt ground the tone pot. ^^ hmm brb in a few hours after play time.
Well that made no difference. It grounded the pot but i am still having problems. The switch seems ok now. Both signal comes through on one side but its only a small amount. Maybe thats normal?
The preamp is a bitch it screams when the tone is on full. when its off it seems ok. I might just go to normal jack again. haha this is practice ctn you cunty bullox.