11-02-2015, 11:37 PM
(This post was last modified: 11-02-2015, 11:40 PM by GoldenVulture.)
(11-02-2015, 10:55 PM)LesStrat Wrote: Beats me. Here is one of the events today:There's net connection issues in there and some hardware/software to do with the computer startup. I'd try a registry clean but I suspect you may have done that, and reload the board drivers [ chipset ].[ rinse and repeat the registry clean }
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000f7 (0x00000200076b3a00, 0x0000203b44420868, 0xffffdfc4bbbdf797, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 110215-22011-01.
Prior to that were several of these (I was not printing at the time):
This was after the errors above:
Name resolution for the name dns.msftncsi.com timed out after none of the configured DNS servers responded.
System--> Winnit
Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.
The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI.DLL, error code 0xc1. See the event user data for context information.
Yesterday (3 of these 1 second apart):
The driver detected a controller error on \Device\Harddisk1\DR2.
and:
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x889FFA4C8844. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Beyond that you may developing a hardware failure. Hard disk or motherboard or Power Supply are the first potential culprits.
If you know how to get into the bios [F2 0r F12 or Esc or Del at startup ] it usually has a readout of the power supply. any variance over 10% may suggest a problem with it.
If you're feeling adventurous you could always go and fuck with Msconfig. and revue what starts up at boot. you can disable supurfluos program startups here. [ To get to it open up a browser and type in msconfig in the address bar and press enter. ]

