06-17-2016, 10:26 PM
I've ordered some more appropriate cans including the multi cap. They're coming from the US so it will be a few weeks before I see them.
I'm going to start accumulating bits to turn into into a KT88 output section and use the Marshal pre-amp configuration.
I figure I can probably just de-solder all the socket connects and others [ controls ]from the tag boards and remove them intact and connected as they are. That would leave me with a chassis and transformers and valve sockets. I want to take all that off and clean the chassis of the top surface corrosion and then maybe spray it. Then start repopulating it with transformers and tag boards and parts.
I'm going to start accumulating bits to turn into into a KT88 output section and use the Marshal pre-amp configuration.
I figure I can probably just de-solder all the socket connects and others [ controls ]from the tag boards and remove them intact and connected as they are. That would leave me with a chassis and transformers and valve sockets. I want to take all that off and clean the chassis of the top surface corrosion and then maybe spray it. Then start repopulating it with transformers and tag boards and parts.