12-22-2015, 08:51 PM
Relic Tele - Back to the original brass saddles, notched so they don't pop out of line on the B and G (Its the one with the Parsons benders).
I FINALLY (after over a year) put my Fishman Fluence Set in my old beater Strat that's been sitting downstairs the last few years. Only tweak is I put a 2.4K resistor on the HF tilt to slightly lessen the effect (not sure if that's enough - time will tell).
I just did a line of sight setup on the Strat just to make sure everything worked. Gotta say - just a Princeton on 4 was pretty sweet sounding with those pickups. Might need to up that resistor on the HF tilt, but that will be the next string change.
I'll let some tension set on the neck overnight and start checking measurements tomorrow.
I FINALLY (after over a year) put my Fishman Fluence Set in my old beater Strat that's been sitting downstairs the last few years. Only tweak is I put a 2.4K resistor on the HF tilt to slightly lessen the effect (not sure if that's enough - time will tell).
I just did a line of sight setup on the Strat just to make sure everything worked. Gotta say - just a Princeton on 4 was pretty sweet sounding with those pickups. Might need to up that resistor on the HF tilt, but that will be the next string change.
I'll let some tension set on the neck overnight and start checking measurements tomorrow.
Proud Deplorable/Listless Vessel/Garbage!