The shinobi build plans.

[kinnikuman]

I have been doing some drawings. Why not just do it like this

With that 5mm cut out in the cavity bottom you could get enough room to get the pot in and out easily. It would also make a nice little wall that you could glue the '
'pot mounting wall'' too.

---

---

Also this is my idea-

You can use this method by mounting to a fu tone style mounting plate, a humbucker baseplate, threaded inserts into the body or just wood screws.

A few of you might have seen this fu tone mounting plate. As you can see in this video it bolts in and you adjust the height by removing the pickup and adjusting the baseplate.



Now for my idea.

start with 1 pickup rout like so or threaded inserts etc.



Mount a humbucker base plate. You can buy them from stewmac or if you're like me you will have a few in the spare parts box.



Grind/file away some of the top of the height screws so they can move up and down.



Install with sprigs as normal




The rig,