Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Good day
#1
Yesterday was the greatest. I cleaned up some fretboard blanks ready for my next projects. I fucked one with the plunge router, I think it already had a crack in it and the router bit removed a large chunk of wood containing some fret slots.

Then on my 37 fret fingerboard i cut way to close to the last slot:shifty:. I think when it comes time i will remove the tangs from that fret and just glue it in. I will need all the room i can get anyway so its not an issue.

I got body wings cut out for the 37 virtus mk2 ''all or nothing''. I just need to find a thicknesser now so i can trim down the fingerboards and body.
This thing will have to be my last extended range guitar before i go onto the next chapter.

Ahhhh i also had to widen the humbucker route on the charvel spectrum i have. Who ever originally convervted it to HSS didnt do a very good job. Luckily the mounting holes were right so i just screwed down the template and ran the router around in there. I also had to drill down for the humbucker feet/legs thingy. HAHA ok done.


Oh and the shinobi is going to be 28 fret now. AIiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 27 is for fools.
Reply
#2
Any questions for me? No? Ok fuck you then.
Reply
#3
No pics?

:old:
Listless Vessels!
Reply
#4
(12-25-2014, 05:14 PM)lreese Wrote: No pics?

:old:

The damn phones usb is being a cunty.
Reply
#5
OK, I'll bite. What pickup(s) are going in it?
(05-16-2015, 12:46 AM)johnjohn Wrote: What can I say - big boobs, small sports bra, no shirt, running down a hill.....that story just writes itself.
Reply
#6
Yeah really I have a hard time following anything without pics. Like half your guitars or build plans have more than 24 frets and I can't keep track of em all.

Come on raph help a brudda out
Reply
#7
(12-25-2014, 09:16 PM)ExplorersRock Wrote: OK, I'll bite. What pickup(s) are going in it?

Well orginally it was going to be something super special. - Shadow eq5 with the ibanez neck simulator circuit. But i couldn't find anyone good enough to take on the diagram.

So now i am just going to use the simulator but with two hotrails. This of course may change again.

[Image: DSC07857.jpg]

A rough idea. Obviously all the parts are just resting together.
[Image: DSC07860.jpg]
The wings look like shit but i think once i clean them up their true beuty will show.

Spectrum, B-Jackson usa pickup/M-j2oor/ N-ultrasonic ref 1
[Image: DSC07863.jpg]

These lines might look a bit more at home too.
[Image: bodymod.jpg]
Reply
#8
(12-26-2014, 01:10 AM)darthphineas Wrote: Dude. You really need to get Orpheo to throw you some lessons.

Fuck off ya dry turd
Reply
#9
Raph you know we're bros at this point but....


Was that fret spacing inconsistency intentional or did you just screw that one up?
Reply
#10
They'd be tone spacing instead of semi tones , wouldn't they ? Semi tones would probably be to small to play.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Laugh B-Day Axe Rebuild: Or, Ooh! Something Shiny! karpathion 9 9,444 06-15-2018, 08:49 AM
Last Post: karpathion
  New Microphone Day GoldenVulture 3 4,861 03-15-2017, 07:59 PM
Last Post: Securb
  Peavey XXL sounds pretty damn good! karpathion 1 2,858 01-14-2017, 12:22 PM
Last Post: youngthrasher9
  Another Day! lreese 7 8,768 08-30-2016, 07:02 PM
Last Post: lreese
  Hmm - Wonder if These are any Good? lreese 3 4,530 08-24-2016, 02:30 PM
Last Post: Oinkus
  I think I did good on this one. karpathion 2 3,959 08-17-2016, 06:39 PM
Last Post: Securb
  My Stupid Redneck Mod of the Day! lreese 5 6,350 07-11-2016, 02:17 PM
Last Post: lreese
  Today is a good day Agileguy 21 23,135 05-15-2016, 05:36 AM
Last Post: Dr. Vegetable
  I Must Have Ignored This in the Day... lreese 5 6,238 01-28-2016, 05:55 PM
Last Post: lreese
  New Spector Legend 4 Classic Day!!!! Jolly 11 11,468 11-07-2015, 06:26 PM
Last Post: Agileguy

Forum Jump:


Users browsing this thread: 1 Guest(s)