Posts: 3,217
Threads: 272
Likes Received: 506 in 349 posts
Likes Given: 493
Joined: May 2014
So I'm going to be painting the racing stripes on my colorsound wah shell tomorrow, but I'm not quite sure how to go about it. I've got some tape specifically meant for being used over paint, but the problem I have is how to cut the racing stripes out of the paint without damaging the color coat. Should I just use an xacto knife and be really careful?
(05-06-2015, 11:27 AM)youngthrasher9 Wrote: If it came down to it, I might suck dick for my family.
Posts: 2,430
Threads: 134
Likes Received: 211 in 153 posts
Likes Given: 326
Joined: May 2014
wrong forum buttmunch.
but since you asked, look up the van halen stripe technique.
aka mask off everything but the area you want striped. then spray the stripe colours on the exposed area. when dry, remove the masking. presto.
Posts: 3,217
Threads: 272
Likes Received: 506 in 349 posts
Likes Given: 493
Joined: May 2014
Oops.
I guess that makes sense. I was just going to tape it all up and cut the stripes out. I guess it makes more sense to just not tape the area... getting my lines right is going to be a PITA though. Ugh
But what if I want to make lines smaller than the tape is wide? I assume I just cut the tape and then put it on? I guess there's no way to get around the PITA that is making straight lines
(05-06-2015, 11:27 AM)youngthrasher9 Wrote: If it came down to it, I might suck dick for my family.
Posts: 2,430
Threads: 134
Likes Received: 211 in 153 posts
Likes Given: 326
Joined: May 2014
05-24-2015, 08:01 PM
(This post was last modified: 05-24-2015, 08:03 PM by CTN.)
Get thinner tape numbnuts.
Also for getting the lines right, what you can do is get some tape the size you want the stripe, or close to it anyway... lay that down as a mockup of the stripe, then mask around it, then remove the mockup stripe.
you can try cutting a wide strip of tape to size... but no guarantees that the sticky side will be perfectly sticky as intended. Though if it's the 3M painter's tape meant for crisp sharp lines, you might get lucky and be able to lay it down on something flat and clean, mark out the dimensions of your strip, cut it using an exacto and a straightedge or a ruler.
Posts: 2,430
Threads: 134
Likes Received: 211 in 153 posts
Likes Given: 326
Joined: May 2014
SOLUTIONIZE IT MAN, COME ON!
Don't they teach you elementary problem solving skills in history class??
Posts: 3,217
Threads: 272
Likes Received: 506 in 349 posts
Likes Given: 493
Joined: May 2014
Yeah but I have limited time. I basically have to start painting when I get home (around midnight) and I only have until morning until my brother will start bitching at me to get out so he can blow his glass. (Yeah I could just punch his lights out - and I so desperately want to - but I'm determined to take the high road). It won't be easy seeing as I was up until 4 painting last night.
(05-06-2015, 11:27 AM)youngthrasher9 Wrote: If it came down to it, I might suck dick for my family.
Posts: 2,430
Threads: 134
Likes Received: 211 in 153 posts
Likes Given: 326
Joined: May 2014
Posts: 34,132
Threads: 1,120
Likes Received: 16,581 in 10,872 posts
Likes Given: 2,452
Joined: May 2014
No worries - a lot of us have the equivalent of that little brother. She answers to 'Honey' or 'Sweetie' or some other sickening pet name. She can also be referred to as 'Bitch' or 'Cunt'.
Proud Deplorable/Listless Vessel/Garbage!
The following 1 user Likes lreese's post:1 user Likes lreese's post
Posts: 6,180
Threads: 272
Likes Received: 1,718 in 1,049 posts
Likes Given: 1,174
Joined: May 2014
I sense a but of animosity in your approach, Lee.
Trust me, I'm a medical professional.
Posts: 34,132
Threads: 1,120
Likes Received: 16,581 in 10,872 posts
Likes Given: 2,452
Joined: May 2014
Perhaps a wee wittle bit.
Its just my sermon from the Church of the Painful Truth this weekend. You just change one problem for another.
Proud Deplorable/Listless Vessel/Garbage!