Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NAD!
#1
This is actually a belated NAD. About a month and a half late.

I bought for next to nothing, a 1968 all tube head, point to point handwired. It's a Lifco model 1000. Electrically it's a clone of the early Traynor yba-1 Bass Master, which makes it a close cousin of the 5F6A '59 Fender Bassman and the Marshall JTM45. It's currently running the original RCA 7027A power tubes and has two of the original made in canada 12ax7's in the preamp alongside a groove tubes 12ax7.

You can probably tell where i'm going with this...

Mods up the wazoo.

Adding in a few mods to take it back to full bassman/jtm specs, ability to use and bias up different power tubes, as well as some other nonsense for my own pleasure like extra gain stages and voicing options in the tone stack and NFB circuits.




Guts
[Image: 007dad150e9ddc64c478d6b1507590a5.jpg]

Giant transformers
[Image: e5c92140364a9190566cf6bab50282e3.jpg]

RCA toobz
[Image: 40d501401d126906af1edfef921cfcf7.jpg]
Reply
#2
Nice , sounds good. I am starting to get worked up about amp mods for the TM 36 already , no frikking ext. speaker jack. Schematics for it apparently don't exist either. Have fun with your mods and let's hear it again when you are finished.
Do as thou wilt . Aleister Crowley
[-] The following 1 user Likes Oinkus's post:
  
Reply
#3
That's awesome man, sweet find!
[-] The following 1 user Likes Snake Aces's post:
  
Reply
#4
Damn, that's clean inside. Nice score!

Now blow out some eardrums.
Someone should put that in their signature…
Reply
#5
(09-21-2015, 08:14 PM)Dr. Vegetable Wrote: Damn, that's clean inside.  Nice score!

Now blow out some eardrums.

clean? it's a goddamn bowl of spaghetti. When doing my mods I'm gonna attempt to clean it up as best I can.

And I have been blowing out eardrums. I did some calculations and realized that my amp should be doing only about 40-50 watts, but is actually pushing closer to 60-70W.

It's so terrifyingly loud, I can't turn it up into overdrive territory at practice with the guys because it drowns out everything, including other guitarist's Orange 100W Rockerverb+4x12. I need to install a master volume asap. And maybe a half-power switch as well.
Reply
#6
Yeah baby cakes.
Reply
#7
Not a lot inside there. I love your rectifying section. According to the data sheet the 7027A is capable of 76 Watts in a push pull configuration.
Reply
#8
(09-21-2015, 11:20 PM)CTN Wrote: clean? it's a goddamn bowl of spaghetti.

May all of your own biological point-to-point spaghetti look so clean when you are pushing 50.   :old:
Someone should put that in their signature…
Reply
#9
(09-21-2015, 11:20 PM)CTN Wrote: It's so terrifyingly loud, I can't turn it up into overdrive territory at practice with the guys because it drowns out everything, including other guitarist's Orange 100W Rockerverb+4x12.

wut
(05-06-2015, 11:27 AM)youngthrasher9 Wrote: If it came down to it, I might suck dick for my family.


Reply
#10
I don't know. it's just immensely loud.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  NAD - Return of the 1001RB Snake Aces 8 10,369 12-26-2016, 08:16 PM
Last Post: lreese
  NAD Snake Aces 14 16,034 04-16-2016, 10:49 AM
Last Post: Securb
  NAD incoming sexy Fender Securb 18 22,342 03-23-2016, 11:44 AM
Last Post: lreese
  NAD GoldenVulture 4 5,734 12-24-2015, 11:35 AM
Last Post: GoldenVulture
  NAD! Oinkus 13 14,676 09-22-2015, 08:02 AM
Last Post: Oinkus
  NAD/NCD Surprise! also, attn: Raph CTN 9 11,439 10-31-2014, 09:45 PM
Last Post: CTN
  NAD: New Acoustic Day! That90'sGuy 1 3,334 09-07-2014, 06:35 PM
Last Post: lreese
  NAD Oinkus 10 14,515 07-31-2014, 12:40 PM
Last Post: DreX

Forum Jump:


Users browsing this thread: 1 Guest(s)