+- TMR Zoo Message Board (http://www.tmrzoo.com/boards)
+-- Forum: The Zoo Zones (http://www.tmrzoo.com/boards/forumdisplay.php?fid=31)
+--- Forum: Guitar Gear - Amps, Axes and Effects (http://www.tmrzoo.com/boards/forumdisplay.php?fid=47)
+--- Thread: Shinobi update and advice. (/showthread.php?tid=8527)
RE: Shinobi update and advice. - GoldenVulture - 06-21-2015
(06-21-2015, 03:03 AM)kinnikuman Wrote: Its dark but you can still see the grain.
A bit like a dark ebony ?
RE: Shinobi update and advice. - CTN - 06-21-2015
Oh man this is gonna look sick! I love the look of different coloured washers on the machine heads. Two of my guitars are rocking that look
RE: Shinobi update and advice. - Securb - 06-21-2015
Ralph you are a talented fuck for a psychopath.
RE: Shinobi update and advice. - kinnikuman - 06-21-2015
(06-21-2015, 07:12 AM)CTN Wrote: Oh man this is gonna look sick! I love the look of different coloured washers on the machine heads. Two of my guitars are rocking that look
Look at what i found. I need .5mm thick :pissed: maybe ui could grind them down. Green could be cool.
http://www.ebay.com.au/itm/M8-GWR-Colourfast-Flat-Washers-A2-Stainless-Steel-Coloured-Washer-/281638275013?pt=LH_DefaultDomain_3&var=&hash=item4192f307c5
Those blue ones would be cool on the probeus build.
RE: Shinobi update and advice. - CTN - 06-21-2015
stay with brass. it'll look better with all the other hardware.
http://www.ebay.com.au/itm/M8-Brass-Flat-WASHER-Brass-Full-WASHERS-50-PK-/361238696491?pt=LH_DefaultDomain_3&hash=item541b81122b
RE: Shinobi update and advice. - kinnikuman - 06-21-2015
(06-21-2015, 04:07 PM)CTN Wrote: stay with brass. it'll look better with all the other hardware.
http://www.ebay.com.au/itm/M8-Brass-Flat-WASHER-Brass-Full-WASHERS-50-PK-/361238696491?pt=LH_DefaultDomain_3&hash=item541b81122b
I cant find any in the right size. I found those shims but their 0.01mm thick.
Wonder if it would be hard to just grind one down? I bet its hard to hold haha. I guess i could always drill out enough for the nut to go .5mm recessed into the top. I overlooked this part......oooops
RE: Shinobi update and advice. - CTN - 06-21-2015
what tuners you using? Sperzels?
RE: Shinobi update and advice. - kinnikuman - 06-21-2015
(06-21-2015, 04:25 PM)CTN Wrote: what tuners you using? Sperzels?
No gotoh, The problem is i forgot to take a few mm off the headstock thickness to allow for the extra material and finish. So now the problem is i cant screw the machine head bolts down with the thick washers provided. I have some stainless .5mm washers here which work but i dont want to paint them.
So i need a M8 washer/shim with a 8-10mm ID, 14-16mm OD, Thickness .5mm oi brass or black.
RE: Shinobi update and advice. - CTN - 06-21-2015
Can you still take some thickness off the back of the headstock or is that not an option?
Sent from my D5803 using Tapatalk
RE: Shinobi update and advice. - kinnikuman - 06-21-2015
(06-21-2015, 04:32 PM)CTN Wrote: Can you still take some thickness off the back of the headstock or is that not an option?
Sent from my D5803 using Tapatalk
Its not really an option now. I could recess the washer in the wood as another option