03-05-2016, 02:13 PM
Ok - Here's where I'm at:
Got a few things slowing me down - iPhone flakeout amongst one of them.
![[Image: 24902804804_dfc8151531_z.jpg]](https://farm2.staticflickr.com/1533/24902804804_dfc8151531_z.jpg)
IMG_0047 by imnothere2000, on Flickr
G string angle is going to improve for sure with restringing in the conventional way.... Its a good thing I'm taking things slow - the middle saddle was on backwards.
If I keep the Fender plate or use the Barden, I either would benefit from longer screws or make a washer for the strings to set on. Could even shim the bridge a little. Intonation screws also need to be trimmed - no biggie, got the tool to do that. Nothing's horrible, the ends are just sticking up. My opinion is now changing that the .5 degree shim is the ticket.
Maybe our guru might chime in with an opinion. ;)
Got a few things slowing me down - iPhone flakeout amongst one of them.
IMG_0047 by imnothere2000, on FlickrG string angle is going to improve for sure with restringing in the conventional way.... Its a good thing I'm taking things slow - the middle saddle was on backwards.
If I keep the Fender plate or use the Barden, I either would benefit from longer screws or make a washer for the strings to set on. Could even shim the bridge a little. Intonation screws also need to be trimmed - no biggie, got the tool to do that. Nothing's horrible, the ends are just sticking up. My opinion is now changing that the .5 degree shim is the ticket.
Maybe our guru might chime in with an opinion. ;)
Proud Deplorable/Listless Vessel/Garbage!
![[-]](http://www.tmrzoo.com/boards/images/collapse.png)
