05-24-2016, 09:40 AM
I've been reading my ass off this morning, and I think I can do what I want with these Stealth transformers.
From what I have learned this morning, that Stealth was fine running with the 2 outer power tubes pulled. You just had to flip the impedance switch down a notch like the rest of them. With it ran like that it's in AB1 PP configuration.
Now, let's look at the spec sheets for EL84s and 6v6s to compare.
[img]<a href=[/img]![[Image: 14omut.jpg]](https://i.imgflip.com/14omut.jpg)
![[Image: 14omz1.jpg]](https://i.imgflip.com/14omz1.jpg)
![[Image: 14on2q.jpg]](https://i.imgflip.com/14on2q.jpg)
Looking at all the info, that OT should be between 5-8k on the primary. From what I've read this morning, switching 6v6s to el84s is pretty common using the same OT.
I've sent Lee Jackson an email asking he remembers the primary impedance of that OT. Hopefully he'll get back to me on that.
I have a little transformer here that is 120V primary, and 12V-0-12V secondary. Can I use that safely to test this OT?
From what I have learned this morning, that Stealth was fine running with the 2 outer power tubes pulled. You just had to flip the impedance switch down a notch like the rest of them. With it ran like that it's in AB1 PP configuration.
Now, let's look at the spec sheets for EL84s and 6v6s to compare.
[img]<a href=[/img]
Looking at all the info, that OT should be between 5-8k on the primary. From what I've read this morning, switching 6v6s to el84s is pretty common using the same OT.
I've sent Lee Jackson an email asking he remembers the primary impedance of that OT. Hopefully he'll get back to me on that.
I have a little transformer here that is 120V primary, and 12V-0-12V secondary. Can I use that safely to test this OT?
I hear Mexico is nice this time of year.